|
Base Capacity* (select one):
|
* Units are sized to deliver
minimum 15-25 watt/ft up to stated depth per ASHRAE standards. Select for your deepest application.
|
|
Piping Connection** (select one):
|
** C-Kit includes adapters for 3/4in, 1in and 1-1/4in pipe
with quick coupling connectors for easy use
|
|
Regional Operating Voltage and Frequency (select one):
|
The combinations below are for
International customers and selected based on local power standards.
Note: 240VAC 60Hz typical for North America; International standards vary.
Important!: Check your power source for correct voltage and frequency. Incorrect selection will damage unit!
|
|
Removable Extension Cord
- available for 500 ft model only
(select one):
|
Note: Standard unit includes
"pigtail" cord that must be connected to your power source,
either direct or with appropriate connector ends.
Removable cord is desirable for storage and creation of
multiple connectors for different generators. Larger
units require too much current for standard connectors, so
are not offered.
|
|
Chassis Finish (select one):
|
|
|
|
Data Logger + Temperature Sensor Configuration (select one):
|
Note: Redundant sensors are desirable for "fail-safe" data
collection during a test. Main sensor data normally
used. Redundant sensors provide an extra set of temperature data which is invaluable in the event of main sensor malfunction (which will protect you from having to redo the test)
|
|
Conductivity Test Tool Kit**** (select one):
|
**** Includes 6ft cable lock, 2 piece screwdriver set, allen wrench set, crescent wrench, pipe wrench, pipe cutter, box knife, channel lock, 1/4 inch nut driver, 5/16th inch nut driver, torch head, funnel, gloves, hose clamps and toolbox.
|
|
H-Valve
Assembly***** (select one):
|
|
|
